Automatic generation of hyperlinks in LaTeX environment, using Vim's Regular Expressions, between PDF documents.

Vim is an editor with endless capabilities. It can also generate hyperlinks in LaTeX language to other locally stored documents, thanks to its built-in Regular Expressions. For lawyers, this means linking a legal document with its related evidentiary materials. This is the analysis of the procedure.

1. Subject of this article.

Sometimes it is necessary to include in a main PDF document a list of documents to be retrieved with specific hyperlinks dedicated to each item in the list.

For example: judicial acts with reference to related document productions.

In this article I deal with the automatic generation of hyperlinks in LaTeX by Vim using the Regular Expressions (RegEx) built into the editor.

2. Main document configuration.

The first operation is to create a document in LaTeX by including, in the preamble, the loading of the hyperref package:

\usepackage{hyperref}

It could also follow the possible \hypersetup{pdfnewwindow} configuration, which is used to open the documents retrieved by the various hyperlinks in separate tabs from the main document:

\usepackage{hyperref}
\hypersetup{pdfnewwindow}

This is necessary because, otherwise, documents retrieved via hyperlinks might overlap with each other and with the main document itself, and this would make it difficult to backtrack through the sequence.

The same pdfnewwindow command can, however, also be inserted within the RegEx formulas that we will see later in this article.

So, the starting situation is as follows: we have a main PDF document that within it has a list of secondary documents that should be retrieved with hyperlinks dedicated to each individual document.

The document list is configured following the standard of LaTeX, as in the following example:

\item DOC 01.pdf
\item DOC 02.pdf
\item DOC nn.pdf
(...)

The environment can be either itemize (or compactitem with the paralist package) or enumerate (or compactenum with the paralist package).

The difference between the two variants itemize and enumerate becomes important for cross-links within document.

Here, then, is the formula that adds a hyperlink to all elements in the main document formed with the above pattern:

:%s/\\item \(.*\.pdf\)/\\item \\href[pdfnewwindow]{run:.\/\1}{\1}/g

Applying the RegEx formula in Vim returns the following string:

\item \href[pdfnewwindow]{run:./DOCUMENT NALE.pdf}{DOCUMENT NAME.pdf}

After the main document is compiled, the linked document is clickable directly from where its name is in the list.

The system also works with PDFs containing spaces in the name.

Instead of applying the formula to all items it is possible to limit the operation to a selection of items from a list.

To achieve this, one must select the rows to be processed and use the following formula (keeping in mind that the first part '<,'>s', is added directly by Vim itself):

'<,'>s/\\item \(.*\.pdf\)/\\item \\href[pdfnewwindow]{run:.\/\1}{\1}/g

4. Explanation of the RegEx formula.

Before analyzing the RegEx formula, you have to consider that in the Regular Expressions embedded in Vim, round brackets allow you to define catchgroups which can, then, be used, with a numbering such as "\1, \2", etc., for substitution elsewhere in the formula.

  • The :%s/ fragment initiates substitution on all lines of the document.
  • The \\item fragment \(.*\.pdf\) captures the part of the document name that follows \item and ends with .pdf.
  • The fragment \item \href[pdfnewwindow]{run:..\/\1}{\1} finally replaces the current line with the desired new format.
  • The \1 callback represents the captured block (the document name), as illustrated in the clarification at the beginning of this paragraph.

5. Management of "underline character".

Attention should be paid to the underlining character i.e., the low stroke ("**") that is often used instead of white space, e.g: DOC_01.pdf instead of DOC 01.pdf.

If the name of the documents to be linked contained such a character, the LaTeX language would return an error.

In the following formula:

\item \href[pdfnewwindow]{run:./DOC_01.pdf}{DOC_01.pdf}

you would get the following error:

filename.tex|13 error| Missing $ inserted.

This error stems from the fact that the underscore character is normally used in LaTeX to indicate a pedice in mathematical notation while, in the operating system, the same character is used as the "unifying character" of the characters that make up document names. In practice, as pointed out above, it is used instead of whitespace in document names.

To avoid the error highlighted above, it is necessary to modify the document names, obviously before applying the RegEx formula, using the escape character (/).

The escape character must precede each underline character.

For example, the name "DOC_01.pdf" should be changed to "DOC_01.pdf".

It is very simple to create a RegEx formula in Vim that inserts the escape automatically for each underscore character in the document.

Here is the formula that performs such a substitution globally in the document.

%s/_/\\_/g

Again, the same formula can be applied to a text selection, using the same rule as described above.

Applying the link creation formula to the document name with escape would thus result in,

\item \href[pdfnewwindow]{run:./DOC\_01.pdf}{DOC\_01.pdf}

This neutralizes the mathematical matrix of the underline character in LaTeX.

6. Links within the text

The links can, of course, also be scattered within the documents, as well as in the hypothetical list mentioned above.

To use the list of documents as above processors in other sparse places in the main document I, for now, follow basically, two methods: indirect linking and direct linking.

6.1. "Indirect linkage" solution:

In the case of indirect linking I use a \label{label_name} tag to the list item (which, in this case, must necessarily be of type numbered) so that I can retrieve the list tagged with the \ref tag anywhere in the document.

Basically: at the scattered point to be linked we write "see Doc. no. \ref{label_name}" where label_name is the same as the one contained in the \label{label_name} tag.

In the case of direct linking you cut directly to the external link by inserting, at the sparse point of the main document, the link copied from the relevant list item.

Copying with Vim is very fast: just use, anywhere on the link to be copied the composite command yiW and paste the fragment at the desired point with p.

I also recommend customizing the hypertext reference to make it more suitable for interdocument citation, as below.

For example: the fragment {run:./DOC_01.pdf}{DOC_01\_DOCUMENT_NAME.pdf} could more simply become {run:./DOC_01.pdf}{DOC 1} within the text.

That is: instead of reporting the full name of the document, only the number within the list could be reported.

Thank You for your attention.

Originally posted at Franco Pasut Web Site

Comments

Post a Comment

Popular posts from this blog

Vim: searching for text containing a slash or a question mark

Vim: searching for text containing a slash or a question mark Vim: the search command To activate a text search in Vim, press one of the following trigger keys in your keyboard: the slash "/" key (do not confuse with the back-slash "\" key) the question mark key. By pressing the slash "/" key will activate a forward search. By pressing the question mark "/" key will activate a backward search. To move the cursor to the results in your document, press the "n" key (mnemonic for “ next ”). To invert the direction of the cursor, press the "N" key, (“upper n”) . What about if you need to search for a slash or a question mark , i.e. the same trigger characters , in your document? You can prepend the Escape character to the trigger key. The Escape character The Escape character is the back-slash key: "\" . Just an example: if you need to forward search (then with / trigger k...
Read more

Vim: Cut, Copy and Paste to and from the system clipboard

Image
Vim: Cut, Copy and Paste to and from the system clipboard Table of Contents 1. Cut, Copy and Paste using the computer keyboard 2. Vim and the clipboard 3. From Vim to the Clipboard 4. From the Clipboard to Vim 5. Some key shortcuts in gVim Figure 1: Vim 1 Cut, Copy and Paste using the computer keyboard Everybody knows how to use the keyboard combinations Ctrl-c , Ctrl-x , and Ctrl-v in Windows and Linux (or Cmd-c , Cmd-x and Cmd-v in macOS) to copy, cut and paste text across applications. Many think that those combinations are universal and work with any application. But Vim and gVim are different, they use another system to exchange information with the rest of the IT world. For example, in Vim under Linux, the key combination Ctrl-v corresponds to the visual block function and does not affect the pasting text. I wrote this article to remind me, as a non-programmer, the key combinations to be used in the Vim world to sha...
Read more